USB 1.1 Isolator MED
Safety: DIN EN 60601-1 (Medical
electrical equipment)
EMC: DIN EN 60601-1-2 (Medical
electrical equipment)
At just 2.0 x 1.7 x 0.8 inches, these little isolators pack a powerful
punch against electrical noises, surges and spikes ? up to 4kV
isolation. Protect expensive PCs and equipment from damaging electrical
storms, power surges and other high EMI/RFI disturbances. This
isolation barrier eliminates ground loops which are disruptive in
measurement applications. USB 1.1 Isolator MED designed to meet UL60601
specification*, isolates up to 4kV - strong enough for hospital and
medical use. These isolators are USB bus powered and provide up to
100mA of current to attached downstream devices. LED indicates power
supplied via upstream USB port. Complies with the USB 1.1 standard and
transfers data at 12 Mbps. Standard USB cables of up to 5 meters may be
used on either side of the USB Isolator.
One USB Cable (~1 Meter) is included in delivery.
The isolators are USB bus powered and can provide up to 100mA of
current to the attached downstream device. This is possible when the
isolator is connected to a high power USB host port.
Technische
Daten:
| USB Standards |
USB 1.1, 12 Mbps, USB
2.0 compatible. These devices are transparent to the operating system,
require no software drivers and will not be enumerated in device manager |
| USB Ports |
High Retention USB Type
B (Upstream) , Type A (Downstream), Minimum withdrawal force of 15
Newtons (~3.4 lbs-force) |
| LED Indicators |
Power from USB bus |
| Input Voltage |
Standard USB bus power
(5VDC) |
| Input power |
500 mA for full power
output |
| Output Voltage |
Standard USB +5V |
| Output power |
100 mA at 500 mA Input
power |
| Isolation voltage |
4 kV |
| Operating temperature |
-40 to 80° C
(-40 to 176° F) |
| MTBF |
1,049,851 hours |
| Enclosure |
IP 30 plastic case |
| Abmessungen |
1.7 x 2.0 x 0.8 in (43.2
x 50.8 x 20.3 mm) |
Druckfähige
Dokumente: Printable Documents:
