Safety: DIN EN 60601-1 (Medical electrical equipment)

EMC: DIN EN 60601-1-2 (Medical electrical equipment)

Powervar ABCE1440-22IEC USV

In- and output Voltage 220-240V / Load Power: 1440 VA / Dimensions: 229 x 211 x 495mm / Weight: 29 kg / Certificates: EN 60950, EN 60601-1. 

For medical systems used in the vicinity of a patient (or anywhere that low leakage current is required), our medical UPMs are the perfect solution for providing fully conditioned, uninterruptible power. North American models are listed to UL60601-1 and cUL22.2 No. 60601-1. International models are listed to IEC60601-1 and are CE marked. All models reduce connected equipment leakage current to less than 300 µamps.

Features

- Low-distortion sine-wave inverter
- Low-impedance isolation transformer
- User hot-swappable battery
- Automatically adjusts for line voltage changes
- Optional Communications Manager software suite provides full manageability of and communication with the UPM
- USB and RS232 connectivity
- Full front-panel LED status indicators
- Meets FCC Class A (optional Class B available)
- UL and cUL listed (international models are VDE listed and CE marked)
- In full compliance with RoHS directives
- Meets NEMA, FAA and DOT guidelines for the transportation of UPS batteries
- Five year warranty on electronics and two-year warranty on battery. runtime - ca. 6 min full load / ca. 20 min half load

Technical Specs:

Type	Standard
Power Rating VA/Watts	1440/1008
Inverter Waveform	Low distortion sine wav
Transfer time	4 ms
typical Frequency	50/60 Hz
BTU/Hr.	76
T.H.D. Max. w/ 100% resistive load	<3% on battery
On Line Efficiency w/o Charger	93%
Input Voltage	250
Input Current	6.3 amps
Output Voltage	230
Output Current VA/Watts	6.3 amps
Input Voltage Range w/o Using Battery	181-290 volts
Output Regulation (mains)	+ 10%
Output Regulation (mains)	+ 5%
Backup time (full load)	6 to 20 minutes
Wall mountable	Yes
Communications Interface	DB9, USB
Shipping Weight (kg.)	39

product information (PDF Datei, 765kb)