The network plug-in isolator 100W provides a safe plug-in of medical devices and personal computers within the patient's vicinity into an IEEE 803.2 (10/100- BaseT,Twisted-Pair) computerNetwork. Workstations are allowed to operate within the patient's, only if they are designed in compliance with IEC 60601-1 as a medical device or if they are fitted with an IEC 60601-1 compliant electrical protection system.
All Inputs and Outputs of a medical device to other non medical devices or Networks outside the surgery environment must comply with IEC-60601-1-1 standard. This galvanic isolation with sufficiently high dielectric strength is required to meet the IEC-60601-1-1 standard. The Network plug-in isolator 100W may also be vicinity used in non medical applications. It provides galvanic isolation for any equipment connected via Ethernet ports to prevent ground loops.
Technical specification:
| Operating mode |
|
non-stop operation |
| Environment condition during operation |
Temperature |
1°C to 70°C |
| |
Relative humidity |
10% to 90% (non-condensing) |
| |
Air-pressure |
860hPa to 1060hPa |
| Storage- and Handling conditions |
Temperatur |
-25°C to 85°C |
| |
Relative humidity |
10% to 90% (non-condensing) |
| |
Air-pressure |
600hPa to 160hPa |
| Certification |
|
CE, UL recognized Component E249126 RoHS konform |
| Plug-in extern |
|
„RJ45" Jack with bayonet
for Plug-In isolator hood 100G/W (optional) |
| Plug-in intern |
|
„RJ45“ Jack |
| Supported communication protocols |
|
IEEE 802.3, Ethernet (10Mbit/s),
Fast-Ethernet (100 Mbit/s) |
| Attenuation |
10Mbit/s (0-30MHz) |
-1db |
| |
100Mbit/s (0-31,25MHz) |
-1db |
| Standard |
|
IEC 60601-1-1 |
| Insulation voltage |
|
4000V AC |
| Protection grade |
|
IP67 |
| Weight |
|
25/55g |
